|
| HYLLUS | 181 Siken-/Bördelmaschine | Biegeleistung: | | 1,0 mm | Motorleistung: | | 0,55 KW |
|
| HYLLUS | 281 | |
| HYLLUS | 300 | Biegeleistung: | | 2,0 / 2,5 / 3,0 mm | Motorleistung: | | 1,8 KW |
|
| COMAC | 301 | Rollen-Ø: | | 135 mm | Biegegeschwindigkeit: | | 5.8 m/min | Motorleistung: | | 1.5 KW |
|
| COMAC | 302 | Rollen-Ø: | | 145 mm | Biegegeschwindigkeit: | | 5.5 m/min | Motorleistung: | | 2.8 KW |
|
| COMAC | 303 | Rollen-Ø: | | 180 mm | Biegegeschwindigkeit: | | 5.5 m/min | Motorleistung: | | 3 KW |
|
| COMAC | 304 | Rollen-Ø: | | 205 mm | Biegegeschwindigkeit: | | 5.2 m/min | Motorleistung: | | 3.5 KW |
|
| COMAC | 305 | Rollen-Ø: | | 245 mm | Biegegeschwindigkeit: | | 6.1 m/min | Motorleistung: | | 4.9 KW |
|
| HYLLUS | 400 | Rollen-Ø: | | 65 / 86 mm | Biegegeschwindigkeit: | | 6-35 / 4-25 m/min | Biegeleistung: | | 1,5 / 2,0 mm | Motorleistung: | | 1,1 / 2,0 KW |
|
| MARPOL | Anfasmaschine 810 | |
| GEKA | BENDICROP 50 | Biegeleistung: | | 100x10 mm | Stanzleistung: | | 27x15 mm | Motorleistung: | | 3 KW | Scherleistung: | | 300x15 mm |
|
| GEKA | BENDICROP 60 | Biegeleistung: | | 150x10 mm | Stanzleistung: | | 40x11 mm | Scherleistung: | | 350x15 mm |
|
| GEKA | BENDICROP 85 SD | Biegeleistung: | | 200x12 mm | Stanzleistung: | | 40x15 mm | Motorleistung: | | 9,0 KW | Scherleistung: | | 450x15 mm |
|
| PILOUS | Entgratmaschine OH 90 | |
| PILOUS | Entgratmaschine OHE 90 | |
| COMAC | Leonardo 4 | Rollen-Ø: | | 145 mm | Biegegeschwindigkeit: | | 3.7 m/min | Motorleistung: | | 1.1 KW |
|
| COMAC | Leonardo 5 | Rollen-Ø: | | 175 mm | Biegegeschwindigkeit: | | 4.4 m/min | Motorleistung: | | 1.5 KW |
|
| ERCOLINA | MB42 MEDI BENDER | |
| PILOUS | OK 100 Handbiegeapparat | |
| PILOUS | OK 120 Handbiegeapparat | |
|